When first powered on, the bridge downloads and installs any updates. If you don't have the latest version, do the following:
- Unplug the Bridge from power
- Wait 10 seconds
- Plug in power to the Bridge
- Wait while the Bridge installs updates (Note: this may take several minutes! Don't unplug while it's updating.)
- Once you see the device online on the device page, you're good to go!
If this doesn't work the first time, repeat steps 1-5, making sure not to unplug too soon when trying again.
If it still doesn't update the bridge, you can force an update using the ssh command line utility:
ssh email@example.com sudo systemctl restart jacktrip-patches
The password is "jacktrip". Try power cycling the device one more time after running this command.
Alternatively, you can just re-flash the MicroSD card using the latest Virtual Studio Device image. This will require updating your device's credentials after flashing.